Water Flow Sensor Switch G1/2" Hall Effect Meter Control Module Board IoT APP DC 5-15V H15 DIY Water Flower Teaching Project
stars, based on ( 0 ) reviews
FREE SHIPPING Over $20 for All orders.
$2.67now [ 1 piece / Lot ]
- Water flow sensor is mainly consists of plastic valve body, rotor assembly and Hall Current Sensor
- Can use for Water heaters, credit card machines, water vending machine, flow measurement device.
- Inlaid with stainless steel impeller shaft, durable wearable
- Seal Ring with the upper and lower force structure never leaks
- Mounted vertically, should not exceed 5 degrees inclination.Temperature of Medium should not exceed 120°C
- Material: Plastic / monocrystalline
- Color: Transparent
- Working voltage: DC 5～15V
- Maximum operating current: 15 mA (DC 5V).
- Working voltage range: DC 5~15 v.
- Load capacity: ≤ 10 mA (DC 5V).
- Work temperature: ≤ 80°C
- Work humidity range: 35%~90%RH (no frost)
- Allowing pressure: pressure 1.75Mpa
- Storage temperature: -25~+80 ° c
- Save humidity: 25%-95%RH
- Flow Range: 1-30L/min
- Insulation resistance:> 100MΩ
- Accuracy (in 1 ~ 30L MIN): ± 10%
- Flow pulse characteristics (5xQ): Q = L / Min ± 3%
- Output pulse duty cycle: 50% ± 10%
- External threads: Approx. 1/2"
- Interface Type:1/2"(1/2" Tubing)
- Dimension:54 x 29mm/2.13 x 1.14"(L x W)
- 1.Transition: 1cm=10mm=0.39inch
- 2.Please allow 0-3cm error due to manual measurement. pls make sure you do not mind before you bid.
- 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
- Water Flow Sensor Switch: 1pcs
- Four-wheel Drive Attributes:
- RC Parts & Accs:
- For Vehicle Type:
- Upgrade Parts/Accessories:
- Remote Control Peripherals/Devices:
- Tool Supplies:
- Model Number:
- Brand Name:
- Technical parameters:
- Value 2
- New Arrival
- Order Tracking
- Contact Us
Your cart is currently empty.